Advantech APAX-5202P
2-port AMONet Master Module
- Max. 20 Mbps transfer rate
- 2 x independent AMONet RS-485 master rings
- Max. 128 AMONet RS-485 slave modules supported
- Easy installation with RJ45 phone jack and LED diagnostic
- KW Multiprog software programming support
APAX-5202P is a PCI interface card which supports two AMONet RS-485 master rings, and transfers data between host and slaves directly without any operations in between. Each ring can control up to 2,048 I/O points, 256 axes, or a combination of I/O points and axes for motion control. The ring can support up to 20 Mbps transfer rate and a maximum communication distance of up to 100 meters. The communication between master and slave is based on a customized RS-485 solution that saves wires, covers a long distance, supports high-speed communication and has time-deterministic features. The communication interface between master and PAC is accomplished by memory mapping. Various functions can be chosen on the slave modules, and standard industrial DIN-rail mounting design makes it easy to distribute them in the field. The master collects information from slave modules and publishes the information to its PAC controller.
AMONet RS-485 Motion Control
Connectors
RJ-45
LED Indictors
Active, Error (Each Port)
Number of Rings
2
Transmission Speed
2.5, 5, 10 or 20 Mbps with automatic data flow control
Serial Interface
Half duplex RS-485 with transformer isolation
Cable Type
CAT5 UTP/ STP Ethernet cable
Surge Protection
10 kV
Communication Distance (Max.)
100 m @ 20 Mbps w/32 slave modules
100 m @ 10 Mbps w/64 slave modules
Slave Module Support
Digital I/O, Motion Control
General
Certifications
CE, FCC Class A
Connectors
2 x RJ45
Dimensions (W x H x D)
30 x 139 x 100 mm
Power Consumption
2.5 W @ 5 VDC (typical)
Relative Humidity
5 ~ 95% (non-condensing)
Operating Temperature
0 ~ 60° C (mounted vertically)
Ordering Information
APAX-5202P-AE
Note: APAX-5202P can only be used by controllers with a PCI interface
Accessories
AMAX-2241/PMA-AE
Connectors
RJ-45
LED Indictors
Active, Error (Each Port)
Number of Rings
2
Transmission Speed
2.5, 5, 10 or 20 Mbps with automatic data flow control
Serial Interface
Half duplex RS-485 with transformer isolation
Cable Type
CAT5 UTP/ STP Ethernet cable
Surge Protection
10 kV
Communication Distance (Max.)
100 m @ 20 Mbps w/32 slave modules
100 m @ 10 Mbps w/64 slave modules
Slave Module Support
Digital I/O, Motion Control
General
Certifications
CE, FCC Class A
Connectors
2 x RJ45
Dimensions (W x H x D)
30 x 139 x 100 mm
Power Consumption
2.5 W @ 5 VDC (typical)
Relative Humidity
5 ~ 95% (non-condensing)
Operating Temperature
0 ~ 60° C (mounted vertically)
Ordering Information
APAX-5202P-AE
- 2-port AMONet Master Module
Note: APAX-5202P can only be used by controllers with a PCI interface
Accessories
AMAX-2241/PMA-AE
- 4-axis AMONet Motion Module for Panasonic Minas A
- 4-axis AMONet Motion Module for Mitsubishi MR-J2S
- 4-axis AMONet Motion Module for Yaskawa Sigma-II
- 32-ch Isolated Digital Input AMONet Module
- 32-ch Isolated Digital Output AMONet Module
- 16/16-ch Isolated Digital I/O AMONet Module
- 20-pin SCSI Cable, 2 m
- 50-pin SCSI Cable, 2 m
Kunden, die diesen Artikel gesehen haben, sahen auch